19
Aug
Brother Sewing Machine Foot Pedal Not Working. If you have a mechanical machine check that the foot is lowered before sewingComputerised machines will remind you to do this. Check to see if there are any broken wires as this could be the problem. Thats usually why the presser foot lever wont work-because the machine is still in bobbin winding mode. This can happen if the foot control drops to the ground.
I would have to constantly unplug it and let it cool down then start again. The inside of your foot pedal does not contain a lot of parts. I have this exact same issue with my Brother XL-5700 sewing machine. I followed the same scary advice of opening my pedal unit and removing the capacitor. The pedal could not be able to provide the correct amount of current the motor requires. Fixing a sewing machine foot pedal.
If you have a mechanical machine check that the foot is lowered before sewingComputerised machines will remind you to do this.
The wire in the twisted and twisted sections of the wiring may break off. Its one thing to decide you want to fix your Brother sewing machine tension problems and its a completely different thing to fixing the problem correctly. After 2 minutes of sewing it would start to sew on its own slowly at first then faster faster. Inspect the wires inside the foot control. I followed the same scary advice of opening my pedal unit and removing the capacitor. This can happen if the foot control drops to the ground.